In this blog, we make some summaries about artificial climbing wall features and structures. You would find out What elements are included in the climbing wall in a professional climbing gym?  

The artificial climbing wall features: In general, the climbing wall shall have the following features: 

  • xx Meters high and xx Meters wide on the front side and xx Meters high, xx meters wide on the adjusted two faces. The height and width vary for different climbing gyms. A 5-10 Meters high is very common for a top-rope climbing wall.
  • The appearance of panelized smooth surface rock using multi-colored bolt-on
  • Fall protection system covers approved lead, top rope, rappel, rescue systems with related quality approved certificates to guarantee safety for climbers.
  • Auto belay systems.
  • Top rope anchors.
  • Lead Anchors.
  • A grid system of T-nuts capable of accepting
  • sufficient ground anchors to provide anchorage of the belayers for all ropes and for use during route setting procedures.
  • The climbing wall design should include features as prows, overhangs, small roofs, dihedrals, vertical, bouldering walls, cracks, and most importantly shall be designed such that the holds can be removed and re-set on a regular time schedule.

The climbing wall design should include features as prows, overhangs, small roofs, dihedrals, vertical, bouldering walls, cracks, and most importantly shall be designed such that the holds can be removed and re-set on a regular time schedule.

How to build a rock-climbing wall in a climbing gym_RMC?

How to build a rock-climbing wall in a climbing gym_RMC?

A typical Artificial Climbing Wall shall include the following items：

  • Climbing wall framing including all support
  • The architectural design of the climbing wall and
  • Engineering of the climbing wall and tower with stamped and sealed
  • Upgrade design for the existing structure if
  • Texturized
  • Top rope anchors, lead anchors, ground
  • All bolts, hangers quickdraws etc required to rig the
  • Floor matting.
  • Sufficient handholds for one route per
  • Rope for all top rope anchors
  • Initial route
  • Staff
bouldering and top rope climbing wall design and manufacturing for climbing gym_One stop hardware solution_RMC

bouldering and top-rope climbing wall design and manufacturing for climbing gym_One stop hardware solution_RMC

Are you on the stage of building a climbing wall for a climbing gym? And we assume you would need a professional hardware supplier that could offer you all the items that you would need to build this climbing wall. Don’t hesitate to contact our sales.

No matter you need regular hardware or a customized one, RMC could be supportive here.