This post is also available in:
Russian 
Portuguese (Brazil)
ADJUSTABLE BRACKET FOR CLIMBING WALL
DESCRIPTION
Climbing Wall Support Braces are used to offer stable and adjusted connection between the plywood and steel structure.
It is made up by below components:
Angle Plate
- The angle plated installed on one end of the threaded rod, which can be connected with the plywood by bolts or other fasteners.
Threaded Rod
- Considering that most climbing walls are a commercial or industrial application, the most commonly threaded rod diameter is M16 or M20 which could offer a strong tensile strength.
Tube with flat end
- There is one M16 Nut welded to one end of the tube, thus makes the total length to be adjustable by twisting the tube’s position on the rod. The other end of the tube would be connected with a hinge structure.
What makes a great support brace?
Enough tensile strength
- Carbon steel S235JR would be a good material for both the threaded rod and the tubes.
Anti-corrosion performance.
- To have more than 10+ anti-corrosion ability, Hot dip galvanized is would be your first option.
QUALITY TESTS REPORTS, CERTIFICATES
SPECIFICATION CHART
| Description | Powder Coating Adjustable Bracket for Climbing Wall |
|---|---|
| Structure | Angle Plate, Threaded Rod, Tube with one flat end |
| Angle Plate Size | L100xW50xH50, 90°，6mm material thickness |
| Threaded Rod | M16, S235JR, Nut welded on one end |
| Tube Diameter | 25mm-32mm, M16 Nut welded on one end, stamped on the other end |
| Min Tensile Strength | More than 2 Tons |
| Raw Material | Stainless Steel, Carbon Steel |
| Finishing | Powder Coating, Cr3+ Zinc Plated |
| Application | The connection between plywood for Commercial, Industrial Climbing wall |
Download Adjustable Bracket PDF Specification Here ! 
